products

FLUSHING OIL

清洗油


Flushing oil has the strong cleaning effect to remove the oil dirt and deposits accumulated in the engine, effectively clean the engine and extend the service life of engine.
清洗油有特强清洁作用,可除去积聚在引擎内的油垢及沉积物,有效清洁引擎,延长引擎寿命
 
Using method:
 
Remove the oil engine oil.
Fill the flushing oil (with the volume same as the one of filled engine oil).
Maintain the engine at the idle state for 10- 15 minutes (Do not accelerate. Otherwise, the engine will be worn).
Change the oil filter after cleaning the flushing oil.
Re-fill the new engine oil.
When finding serious carbon deposits and sludge, please handle it carefully.
After the new engine oil is filled, you shall observe the engine abnormal sound, oil way blockage, engine oil cleanliness and instrument panel fault signal lamp.

使用方法:
1. 排去旧机油
2. 注入清洗油(份量与注入机油相同)。
3. 引擎维持怠速状态10-15分钟(不要加速,否则可令引擎磨损)。
4. 排出清洗油后,再更换油滤。
5. 重新注入新机油。
6. 当发现车况有严重的积炭和油泥时,请谨慎处理。
7. 加注新机油后,应注意观察发动机是否有异响、油路是否堵塞、机油的清洁度,及仪表盘故障信号灯。

 
使用说明:
请勿将本产品置放于高温或阳光直接暴晒处,本产品使用于车辆内部复杂零件,详细使用方法请咨询专业技术工程师。
如果车辆具有特殊的加注要求,请参照汽车制造商要求。
避免长期和重复接触皮肤。
误吞后切勿自行诱发呕吐,立即就医诊治并出示该容器或标签。
请保护好环境,以负责任的态度妥善处置废弃物。
如有需要,可提供安全技术说明书。
有害物质。
远离食物、饮料及动物饲料。
不要让儿童接触。